The HKS Fuel Upgrade Kit - 860cc Nissan GT-R R35 is a full Fuel kit for prepare your R35 engine to the necessity of a full powered tuning. The Kit includes the 860cc Injectors and Fuel Pump Upgrade for a vehicle with upgraded turbines. The Injectors were designed exclusively for R35 GT-R. The Fuel Pump is the factory replacement type so no modification is necessary for installation.
Upon purchasing please state the car from the compatibility list that you would like to have the HKS Fuel Upgrade Kit for.
Get this and all your JDM at RHDJapan!!
Upon purchasing please state the car from the compatibility list that you would like to have the HKS Fuel Upgrade Kit for.
Get this and all your JDM at RHDJapan!!
Brand: HKS
Product: Fuel Upgrade Kit - 860cc Nissan GT-R R35
Part Number: 14007-AN002
SPECIFICATIONS:
Kit includes:
- 6x 860cc Injectors
- 6x O-ring for Injector
- 2x Fuel Pumps
- Hardware
Pump O.D. (mm): 38
Pump Length (mm): 114
Pump L/h:
- HKS: 195
- OEM: 130
Injector Type: Top Feed High Resistor
Injector connector color: Purple
Injector connector Shape: Round
Injector Num. of Holes: 2 (Tapered)
Invalid Injector Time at 14V: 1500
Injector Flow Rate:
- HKS: 860
- OEM: 565
Total Injected Volume (cc):
- HKS: 950
- OEM: 620
Note: Measured value at 350kPa. Actual value may be decreased due to the invalid injection time.
Output (ps):
- HKS: 800
- OEM: 570
Num of Injector Holes:
- HKS: 2 (Tapered)
- OEM: 12
- Fuel Pumps -
Flow amount at 300kPa:
- HKS: 195 (250) x2L/h
- OEM: 130 (175) x2L/h
Flow amount at 500kPa:
- HKS: 145 (205) x2L/h
- OEM: 95 (140) x2L/h
Output (ps):
- HKS: 700
- OEM: 950
Note: Measured value at 12V(14V)
FEATURES:
- Fuel Upgraded Kit exclusively for VR38DETT/R35 GT-R.
- The Injector and Fuel Pump required for performance improvement by GT800 are included in the Kit.
injectors:
- The injection volume is increased comparing to the factory volume so it works for higher engine output without increasing the fuel pressure.
- The injection size is the same as the factory so it can be installed with the factory fuel rail.
- 2 tapered injection holes spray better than the factory injector.
Note: The injection direction is set toward the intake valves head. When the valve is opened, fuel is sprayed directly toward the inside cylinder. Therefore, the response gap of the A/F at acceleration is less than the 1-jet type. The improvement can be experienced during revving the engine a few times while at neutral. Comparing to non-HKS Injectors utilizing the same design, HKS Injector spray fuel in a mist form, so combustion can be more stable. The difference is more obvious especially on cold start. The stable combustion reduced the black smoke at accelerating.
Fuel Pump:
- Largest amount of flow of the in-tank fuel pumps.
- Installation can be done without modification since the size is the same as the factory.
- Less power consumption and low operation noise.
- High relief pressure enables stable fuel supply.
Note: No modification is necessary. (See Picture)
Product: Fuel Upgrade Kit - 860cc Nissan GT-R R35
Part Number: 14007-AN002
SPECIFICATIONS:
Kit includes:
- 6x 860cc Injectors
- 6x O-ring for Injector
- 2x Fuel Pumps
- Hardware
Pump O.D. (mm): 38
Pump Length (mm): 114
Pump L/h:
- HKS: 195
- OEM: 130
Injector Type: Top Feed High Resistor
Injector connector color: Purple
Injector connector Shape: Round
Injector Num. of Holes: 2 (Tapered)
Invalid Injector Time at 14V: 1500
Injector Flow Rate:
- HKS: 860
- OEM: 565
Total Injected Volume (cc):
- HKS: 950
- OEM: 620
Note: Measured value at 350kPa. Actual value may be decreased due to the invalid injection time.
Output (ps):
- HKS: 800
- OEM: 570
Num of Injector Holes:
- HKS: 2 (Tapered)
- OEM: 12
- Fuel Pumps -
Flow amount at 300kPa:
- HKS: 195 (250) x2L/h
- OEM: 130 (175) x2L/h
Flow amount at 500kPa:
- HKS: 145 (205) x2L/h
- OEM: 95 (140) x2L/h
Output (ps):
- HKS: 700
- OEM: 950
Note: Measured value at 12V(14V)
FEATURES:
- Fuel Upgraded Kit exclusively for VR38DETT/R35 GT-R.
- The Injector and Fuel Pump required for performance improvement by GT800 are included in the Kit.
injectors:
- The injection volume is increased comparing to the factory volume so it works for higher engine output without increasing the fuel pressure.
- The injection size is the same as the factory so it can be installed with the factory fuel rail.
- 2 tapered injection holes spray better than the factory injector.
Note: The injection direction is set toward the intake valves head. When the valve is opened, fuel is sprayed directly toward the inside cylinder. Therefore, the response gap of the A/F at acceleration is less than the 1-jet type. The improvement can be experienced during revving the engine a few times while at neutral. Comparing to non-HKS Injectors utilizing the same design, HKS Injector spray fuel in a mist form, so combustion can be more stable. The difference is more obvious especially on cold start. The stable combustion reduced the black smoke at accelerating.
Fuel Pump:
- Largest amount of flow of the in-tank fuel pumps.
- Installation can be done without modification since the size is the same as the factory.
- Less power consumption and low operation noise.
- High relief pressure enables stable fuel supply.
Note: No modification is necessary. (See Picture)
Compatibility is from maker for JDM cars only. We don't guarantee fitment. Always do your own research before purchase. After-sale support does not include installation support.
Nissan GT-R R35 VR38DETT (11/2007-11/2010)
Nissan GT-R R35 VR38DETT (11/2010-06/2016)
Nissan GT-R R35 VR38DETT (07/2016-11/2017)
Nissan GT-R R35 VR38DETT (11/2017~)
Nissan GT-R R35 VR38DETT (11/2007-11/2010)
Nissan GT-R R35 VR38DETT (11/2010-06/2016)
Nissan GT-R R35 VR38DETT (07/2016-11/2017)
Nissan GT-R R35 VR38DETT (11/2017~)
Product Reviews
“ THE CUSTOMER'S VOICE ”
RHDJapan Store Reviews
Adjustability, strength and ease of movement Review by Wesley
Cusco quality, allows for caster adjustment up front
Cusco quality Review by Wesley
Easy install, makes a good difference
Noticeable Difference, Fast Shipping Review by Wesley
Ordered this and a few other Cusco items for my ER34. Easy install, great quality
Fast Shipping, Tein great for upgraded Ride quality Review by Wesley
Great Tein Quality, Fast Shipping, Very well packaged
Perfect for GTX Turbos, where the internal wastgate is too small. Review by Philipp
The quality is typically HKS perfect.The price-performance ratio is very good and there is no other option on the market where you can increase the spring preload. It would be nice if HKS would bring another 40mm version onto the market with a smaller housing. Because it's not that easy to accommodate such a large wastgate in the engine compartment.